Izmantojot šo lapu, jūs piekrītat sīkdatņu izmantošanai. Sīkdatnes palīdz uzlabot pakalpojumu kvalitāti.
Adhesive cord of butyl rubber Ampacoll RS
Self-adhesive round cord made from high-quality butyl rubber. Air-tight jointing of precisely-fitted wall elements in wood-framed buildings, or edge connections between vapour checks and brick.
- Vapour-barrier properties
- For component connections on uneven surfaces
- For connections on structured substrates
- Ideal in joist areas
- > 300 % elasticity
- Internal/External
Available sizes:
- 4mm × 12m
- 6mm × 8m
- 10mm × 4.75m
- 20mm × 2.35m
Technical data sheet Ampacoll RS
For more detailed information about the product and its purchase options, contact SIA Visico Fastening Systems
Adhesive cord of butyl rubber Ampacoll RS
Application tips:
Please note that gluing to wet or damp surfaces usually causes problems. The surface to be repaired must be dry, clean and free of dust and grease. Floors and edge/end joints on highly textured or dirty surfaces such as concrete or masonry should be primed with Ampacoll Primax. Sealing joints should not be more than 2/3 of the diameter of the cord used. This is achieved by leveling the corresponding part. When sealing the wall element to the concrete floor, after laying Ampacoll RS, 20 mm, the spacer can be left on the cord. This allows the wall element to move to a limited extent during the settlement phase.
